Universal Adhesive and Sealant
Weicon Flex 310 M Hybrid
Weicon,
the manufacturer of special chemical products, has developed a universal
adhesive and sealant that is suitable for many areas of industry – Weicon Flex
310 M Hybrid.
Universally applicable, strong adhesion and flexibility
Flex
310 M Hybrid is universally applicable, permanently elastic, fast-curing and
provides strong adhesion. The 1-component SMP-based adhesive and sealant offers
high elasticity, good mechanical strength, is non-corrosive to surfaces and can
be sanded and painted over. Flex 310 M Hybrid is neutrally
cross-linking, highly weather-resistant and low in both odour and emissions.
The flexible adhesive and sealant is free from silicone, isocyanate and
solvents.
Suitable for a wide range of surfaces
It
adheres very well to powder-coated, galvanised, anodised, chromated or hot-dip
galvanised surfaces, even without extensive surface pre-treatment with a
primer. The adhesive and sealant adheres to a wide variety of materials, such
as metal, various plastics, natural stone, concrete, masonry, plaster, wooden
floors, glass etc.
For different industrial sectors
The
universal adhesive and sealant can be used in many industrial areas, such as
tank and apparatus construction, car body, container and vehicle construction,
pipework and fitting construction, in the energy and electrical
industries, in insulation technology and in plastics technology. In addition,
Weicon Flex 310 M Hybrid has a high mould resistance and is compatible with
natural stone. This also makes it suitable for use in the sanitary sector or in
the construction industry.
Easy to use
The
surfaces to be bonded must be dry, clean and free of oil, grease and dust. The
processing temperature of the adhesive and sealant is between +5 °C and +40 °C.
The skin forms after around ten minutes, and the first two to three millimetres
of the material harden in the first 24 hours.
296 words
44 rows
1922 signs (incl. blanks)
